Key benefits
STANDARD EQUIPMENT INCLUDES:
- Body width of 2.5 metres;
- Stainless steel clean and dirty water tanks divided into three compartments;
- Stainless steel bin lifter with gripping arms for containers;
- High-pressure pump system with an 80 l/min pump operating at 160 bar;
- Enclosed stainless steel washing chamber with labyrinth seal and a 2 m³ sludge collection tank with automatic opening;
- Automatic impeller pump for transferring dirty water;
- Work light for illuminating the inside of the washing chamber;
- Reversing buzzer;
- Stainless steel internal washing system with self-rotating spray heads;
- External washing system with fixed stainless steel spray bars;
- Manual washing lance with hose reel;
- Galvanised steel equipment compartment with two side access doors;
- Electrical system controlled by an automotive-grade electronic control unit with an in-cab touchscreen;
- Semi-automatic control panel on the right-hand side of the cab;
- Work light and two rotating beacons;
- Five infrared cameras.
Product features
Hot-water Pressure Washer Boilers
In this hot-water version, the machine is equipped with two diesel-fired boilers that heat the water supplied to a maximum temperature of 60–70 °C.
Configuration for asymmetrical containers
The machine can be configured to handle asymmetrical containers. This configuration involves substantial changes to its layout. The bin lifter is fitted with a narrow gripping device, and the robot is converted to a moving-bridge configuration to prevent collisions with the container lids. Two lid-opening devices are also installed. From 2026 onwards, the machines are equipped with an internal-view camera to check that the lid has opened.
Left-side container gripping
The machine can load waste containers from the left-hand side.
Reduced downtime
When in its rest position, our container gripping system keeps its arms outside the washing chamber, ready to engage the next container. This eliminates the time otherwise required to open the tailgate and extend the arms from the washing chamber.
Fully enclosed washing chamber
Labyrinth and rubber seals ensure that the washing chamber is completely enclosed, preventing water spray from escaping during washing.
Double-section tailgate
The upper tailgate of the washing chamber is divided into two sections. This minimises the overall height when open (approximately 300 mm above the machine’s height with the tailgate closed) and reduces opening time. The machine can operate without difficulty along tree-lined roads and experiences minimal wind resistance even in strong winds. When containers are arranged in rows or close together, the operator can move the bin washer with the tailgate open, reducing cycle times.
Easy end-of-shift cleaning
The floor of the washing chamber’s collection tank is completely unobstructed and sloped to facilitate cleaning at the end of each shift.
Flexibility through modular construction
The machine consists of three modules, providing flexibility in its configuration. The tank size can be adapted to the chassis wheelbase and payload capacity to optimise weight distribution.
Stainless steel construction
The washing chamber structure, tank and comb are made entirely from AISI 304 stainless steel. The high quality of the materials ensures reliability and long-term value.
Touch controls
An in-cab touchscreen is provided for machine configuration and troubleshooting.
Performance pack RL
The machine can be fitted with additional optional equipment to improve its washing performance.
The external washing system is upgraded with oscillating spray bars, significantly improving washing quality. A second washing pump, operating exclusively with cold water, is added to allow simultaneous external washing, saving 15 seconds per cycle.
Bin Washer Series
| Version | Tank Capacity (Lt) | Gross Vehicle Weight (kg) | Height (mm) | Material | |
|---|---|---|---|---|---|
 | CW SL | 5,000 to 9,000 | 18,000 - 26,000 | from 8,000 | AISI 304 stainless steel |
